Description
| contact | seek advice from | mailbox |
| Su Mingli | +86 18059281367 | sales5@xrjdcs.com |
Xiamen XingRuiJia is a supplier of
GE IS200TRTDH1CCC Printed Circuit Board
and will be your good helper. Please feel free to inquire for more details.
Features:
The IS200TRTDH1CCC is a printed circuit board created by GE for the Mark VI system. The Mark VI is a Speedtronic steam/gas turbine management system with a PC-based operator interface and software designed to work specifically with the MKVI hardware.
The IS200TRTDH1CCC is an RTD Input terminal board. This board has two removable terminal blocks with 24 screw connections per block. These components disconnect from the board for maintenance. Each RTD input connects to terminal blocks using three wires. The board accepts up to sixteen RTD inputs. There are three female 37-pin cable connectors located on the opposite side of the PCB; these are labeled JA1 and JB1. Cables connect the TRTD board to the VRTD processor. These inputs have noise suppression to protect against high-frequency noise and power surge.
All RTD signals on the IS200TRTDH1CCC have high-frequency decoupling to ground at the signal entry. The loss of a cable or an I/O processor will not cause the loss of any RTD signals in the control database, due to multiplexing within the I/O processors.
The IS200TRTDH1CCC has eight channels per terminal board. Its span is 0.3532 to 4.054 V. Maximum lead resistance is 15 Ω maximum two-way cable resistance. The board can use RTDs made of platinum (10, 100, and 200 Ω,) copper (10 Ω,) and nickel (120 Ω.)
